TM 9-2320-361-34 15-44. BRAKE, FEED, AND DRIVE CLUTCH MAINTENANCE (Contd) 34. Install new seal (14), two bearings (12), and spacer (13) on drive shaft (2). 35. Install washer (5) and spacer (4) on feed pinion (7). 36. Install feed pinion (7) with bearing (6) and new woodruff key (8) on feed shaft (1). 37. Install new woodruff key (3), drive pinion (11), nut (10), and new cotter pin (9) on drive shaft (2). 38. Install intermediate gear and case (16) on main support tube (17) (para. 15-42). 39. Look through power leveler shaft hole (15) to ensure that toe of drive pinion (11) is alined with toe of drive gear (18) and heel of feed pinion (7) is alined with heel of hub and gear (19). 15-198