TM 9-2320-361-34 ❞ 15-44. BRAKE, FEED, AND DRIVE CLUTCH MAINTENANCE (Contd) NOTE Apply sealing compound to gasket mating surfaces before installation. 27. Install new gasket (26) on clutch case (29). 28. Install chains and lifting device on case (29). WARNING All personnel must stand clear during lifting operations. A snapped chain, shifting or swinging load may cause injury to personnel. NOTE Assistant will help with lifting operations. 29. Position case (29) over clutch and brake (28) and install with six new lockwashers (25), screws (27), and four nuts (24). 30. Remove lifting device and chains from case (29). NOTE . Apply sealing compound to gasket mating surfaces before installation. ● Install all new shims to previously recorded thickness. 31. Install two new gaskets (35) and brake shell (36) on case (29). 32. Install new shims (38), clutch case cap (34), six new lockwashers (33), screws (32), and four nuts (37) on case (29). 33. Install new shims (39). new gasket (40). and clutch case cap cover (41) on clutch case cap (34) with 15-197