TM 9-2320-361-34 I 15-44. BRAKE, FEED, AND DRIVE CLUTCH MAINTENANCE (Contd) 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. Install bearing (2) on drive sleeve (3). Install nine clutch plates (7), eight clutch plates (8), and clutch plate (9) on clutch hub (1). Install new woodruff key (4) and clutch hub (1) on drive sleeve (3). Install sleeve bearing (12) on clutch hub (1). Install clutch pressure plate (10) with bearing (11), throw ring (13), and brake pressure plate (17) with adjusting nut (16) on sleeve bearing (12). Install thirteen clutch plates (18) and (19) on brake hub (20). Install brake hub (20) on drive sleeve (3). Install new woodruff key (6) and drive sleeve (3) on drive shaft (5). Install bearing (21) and adjusting nut (22) on drive sleeve (3). Tighten adjusting nut (22) to eliminate end play of bearings (2) and (21) and hubs (1) and (20). Tighten setscrew (15) and install safety wire (14). Rotate adjusting nut (16) to apply pressure to brake pressure plate (17) until adjusting nut (16) is tight. Then back adjusting nut (16) off 3/8 turn (4 to 5 notches) until lock groove is engaged. Install bearing (23) on drive shaft (5). 15-196