TM 9-2320-361-34 15-44. BRAKE, FEED, AND DRIVE CLUTCH MAINTENANCE (Contd) b. Inspection 1. For general inspection instructions, refer to para. 2-9. 2. Inspect two sleeve bearings (10), two roller bearings (9), four bearings (12), and bearings (3) and (17) (TM 9-214). Replace if damaged. NOTE Feed pinion gear or drive pinion gear must be replaced with associated intermediate case ring gears as a matched set. 3. Inspect main drive gear (14), drive pinion (15), and feed pinion (16) for burrs, nicks, chips, cracks, and damaged teeth. Small nicks or burrs can be removed with a fine mill file. Replace if damaged. 15-192