TM 9-2320-361-34 15-24. 115- AND 24-VOLT WIRING HARNESS REPLACEMENT (Contd) 6. Attach safety wires (5) to six 115-volt domelight wire leads (1). 7. Attach safety wires (5) to two 24-volt domelight wire leads (2). 8. Attach safety wires (5) to two 115-volt receptacle connectors (6). NOTE Do not remove safety wire from wire leads until wire leads are connected. 9. Pull safety wires (5) so that six 115-volt domelight wire leads (1) and two 24-volt domelight wire leads (2) are pulled through van body ceiling rails (3) and two 115-volt receptacle connector wire leads (6) are pulled through van body ceiling rails (3) and side rails (4). 15-92