TM 9-2320-361-34 15-22. 115-VOLT WIRING HARNESS REPLACEMENT THIS TASK COVERS: a. Removal b. Installation INITIAL SETUP APPLICABLE MODELS REFERENCES (TM) M185A3 and M109A3 TM 9-2320-361-34P TOOLS EQUIPMENT CONDITION General mechanic’s tool kit (Appendix B, Item 1) 115-volt receptacles removed (para. 15-20). Tool kit, electrical (Appendix B, Item 2) MATERIALS/PARTS Electrical tape (Appendix C, Item 26) NOTE ● Tag wires, leads, cables, and terminals for installation. ● Both 115-volt receptacle wiring harnesses are removed basically the same. This procedure covers one harness. a. Removal 1. Remove electrical tape from connectors (4). 2. Cut receptacle wiring harness (3) from main wiring harness (1) at connectors (4). 3. Remove receptacle wiring harness (3) from receptacle strip (2). b. Installation 1. Place receptacle wiring harness (3) in receptacle strip (2). 2. Connect receptacle wiring harness (3) to main wiring harness (1) at connectors (4). 3. Wrap connectors (4) with electrical tape. FOLLOW-ON TASK: Install 115-volt receptacles (para. 15-20). 15-77