TM 9-2320-361-34 I 15-17. VAN BODY SIDE PANEL REPLACEMENT THIS TASK COVERS: a. Removal b. Installation INITIAL SETUP APPLICABLE MODELS REFERENCES (TM) M185A3 and M109A3 TM 9-2320-361-34P TOOLS EQUIPMENT CONDITION General mechanic’s tool kit Van body cabinet and work benches removed (Appendix B, Item 1) (para. 15-15). PERSONNEL REQUIRED Two GENERAL SAFETY INSTRUCTIONS Gloves, eyeshields, and dust mask must be worn during panel removal and installation. WARNING Gloves, eyeshields, and dust mask must be worn during panel removal and installation. Failure to do so may result in injury to personnel. NOTE All van body side panels are removed and installed basically the same. Remove twenty-four screws (3) and side panel (5) from van body wall (l). b. Installation 1. Place side panel (5) on van body wall (1) and aline panel screw holes (4) with screw holes (2) in frame. 2. Install side panel (5) with twenty-four screws (3). 15-68