TM 9-2320-361-34 15-5. TAlLGATE CONTROL LINKAGE MAINTENANCE (Contd) c. Installation 1. Install control bar (11) on tailgate latch (5) with pin (8). 2. Install pawl (6) on tailgate latch (5) with pin (7). 3. Install control bar (11) on dump body (9). 4. Install tailgate latch (5) and control bar (11) on dump body (9) with three screws (4) and new locknuts (3). 5. Install two link plates (1) on control rod (10), control bar (11), and dump body (9) with two new locknuts (2). 6. Install two clevises (13) on two control rods (10) with four nuts (19). 7. Insert cross-shaft (22) through three bearings (17). 8. Install two new woodruff keys (21) on cross-shaft (22). 9. Install levers (23) and (18) on cross-shaft (22) with two screws (20) and new locknuts (16). 10. Install two clevises (13) and control rods (10) on levers (23) and (18) with two screws (12). washers (14), and new locknuts (15). 15-18