TM 9-2320-361-34 15-3. CONTROL LEVER AND LOCK REPLACEMENT (Contd) b. Installation 1. Install lock (1), spring (3), washer (4), and new locknut (5) on lever handle (2). 2. Install two lubrication fittings (6) on brackets (7). 3. Install two brackets (7) on shaft (18). 4. Install new woodruff key (19) on shaft (18). 5. Install lever (15) on shaft (18) with new locknut (17) and screw (16). 6. Install lever (15), shaft (18), lever handle (2), boot (11), and two brackets (7) on floor (13) with four new locknuts (12) and screws (14). 7. Install linkage (9) on lever (15) with clevis pin (8) and new cotter pin (10). FOLLOW-ON TASKS: ● Lubricate lever and lock (LO 9-2320-209-12-1). . Install driver’s seat (TM 9-2320-361-20). 15-10