TM 9-2320-361-34 Section Il. DUMP BODY MAINTENANCE I 15-2. DUMP BODY MAINTENANCE INDEX PARA. TITLE PAGE NO. NO. 15-3. Control Lever and Lock Replacement 15-8 15-4. Dump Body Maintenance 15-11 15-5. Tailgate Control Linkage Maintenance 15-16 15-6. Cab Protector Maintenance 15-20 I 15-3. CONTROL LEVER AND LOCK REPLACEMENT THIS TASK COVERS: a. Removal b. Installation INITIAL SETUP APPLICABLE MODELS M342A2 REFERENCES (TM) LO 9-2320-209-12-1 TOOLS TM 9-2320-361-10 TM 9-2320-361-20 General mechanic’s tool kit TM 9-2320-361-34P (Appendix B, Item 1) EQUIPMENT CONDITION MATERIALS/PARTS ● Parking brake set (TM 9-2320-361-10). Five locknuts (Appendix F, Item 89) ● Driver’s seat removed (TM 9-2320-361-20). Locknut (Appendix F, Item 106) Woodruff key (Appendix F, Item 272) Cotter pin (Appendix F, Item 6) a. Removal 1. Remove cotter pin (10), clevis pin (8), and linkage (9) from lever (15). Discard cotter pin (10). 2. Remove four locknuts (12) and screws (14) from two brackets (7) and floor (13). Discard lock- nuts (12). 3. Remove shaft (18), brackets (7), and boot (11) from floor (13). 4. Remove locknut (17), screw (16), and lever (15) from shaft (18). Discard locknut (17). 5. Remove woodruff key (19) from shaft (18). Discard woodruff key (19). 6. Remove two brackets (7) from shaft (18). 7. Remove two lubrication fittings (6) from brackets (7). 8. Remove locknut (5), washer (4), spring (3), and lock (1) from lever handle (2). Discard locknut (5). 15-8