TM 9-2320-361-34 14-5. DOOR GLASS REPLACEMENT THIS TASK COVERS: a. Removal b. Installation INITIAL SETUP APPLICABLE MODELS REFERENCES (TM) All TM 9-2320-361-20 TOOLS TM 9-2320-361-34P General mechanic’s tool kit EQUIPMENT CONDITION (Appendix B, Item 1) Cab door glass and frame removed MATERIALS/PARTS (TM 9-2320-361-20). Frame seal (Appendix F, Item 238) Channel lift seal (Appendix F, Item 235) Channel lift filler (Appendix F, Item 236) a. Removal 1. Remove four screws (4) from channel lift (5) and frame (3). 2. Remove channel lift (5), channel lift filler (6), and channel lift seal (7) from frame (3). Discard channel lift filler (6) and channel lift seal (7). 3. Slide glass (1) out of frame (3). 4. Remove frame seal (2) from frame (3). Discard frame seal (2). I b. Installation 1. Install new frame seal (2) in frame (3). 2. Install glass (1) in frame (3). Tap glass (1) gently into position. 3. Install new channel lift seal (7) on bottom of glass (1). 4. Install new channel lift filler (6) on channel lift (5). 5. Install channel lift (5) on frame (3) with four screws (4). 2 FOLLOW-ON TASK: Install cab door glass and frame (TM 9-2320-361-20). 14-4