TM 9-2320-361-34 SectIon Il. REAR AXLE AND SUSPENSION MAINTENANCE 10-7. REAR AXLE AND SUSPENSION MAINTENANCE INDEX I PARA. TITLE PAGE NO. NO. 10-8. Forward-Rear and Rear-Rear Axle Assembly Replacement 10-43 10-9. Tandem Axle Replacement 10-48 I 10-8. FORWARD-REAR AND REAR-REAR AXLE ASSEMBLY REPLACEMENT THIS TASK COVERS: a. Removal b. Installation INITIAL SETUP APPLICABLE MODELS All TOOLS General mechanic’s tool kit (Appendix B, Item 1) 1-1/8-in. socket, 3/4in. dr. (Appendix B, Item 33) Torque wrench, 3/4-in. dr. (Appendix B, Item 6) Breaker bar, 3/4-in. dr. (Appendix B, Item 34) Handle, socket wrench, 3/4-in. dr. (Appendix B, Item 35) Jack stands Hydraulic jack MATERIALS/PARTS Twelve lockwashers (Appendix F, Item 148) Three locknuts (Appendix F, Item 89) Four seal washers (Appendix F, Item 243) Brake fluid (Appendix C. Item 4) PERSONNEL REQUIRED Two REFERENCES (TM) TM 9-2320-361-10 TM 9-2320-361-20 TM 9-2320-361-34P EQUIPMENT CONDITION ● Inner and outer wheels removed (as required) (TM 9-2320-361-20). ● Propeller shafts removed (if installed) (TM 9-2320-361-20). GENERAL SAFETY INSTRUCTIONS . Weight of vehicle must be supported on jack stands at all times. ● Ensure axle is balanced and personnel are clear before lowering axle. 10-43