TM 9-2320-361-34 8-4. TRANSMISSION TOP COVER REPLACEMENT THIS TASK COVERS: a. Removal b. Installation INITIAL SETUP APPLICABLE MODELS REFERENCES (TM) All TM 9-2320-361-20 TOOLS TM 9-2320-361-34P General mechanic’s tool kit EQUIPMENT CONDITION (Appendix B, Item 1) ● Transmission gearshift lever removed Torque wrench, 1/2-in. dr. (Appendix B, Item 7) (TM 9-2320-361-20). MATERIALS/PARTS . Cab tunnel cover removed (TM 9-2320-361-20). Gasket (Appendix F, Item 81) Eight screw-assembled lockwashers (Appendix F, Item 157) a. Removal CAUTION Prevent dirt from entering transmission when performing this task. Failure to do so may damage equipment. Remove eight screw-assembled lockwashers (1), transmission top cover (6), and gasket (4) from transmission (3). Discard screw-assembled lockwashers (1) and gasket (4). I b. Installation 1. Aline shifter forks (5) with synchronizers (2). 2. Install new gasket (4) and transmission top cover (6) on transmission (3) with eight new screw- assembled lockwashers (1). Tighten screw-assembled lockwashers (1) 25-32 lb-ft (34-43 N-m). / FOLLOW-ON TASKS: . Install cab tunnel cover (TM 9-2320-361-20). ● Install transmission gearshift lever (TM 9-2320-361-20). 8-8