TM 9-2320-361-34 7-4. REAR WIRING HARNESS REPLACEMENT (Contd) CAUTION ● Prior to removal of wiring harness, ensure all clamp removals and wire disconnections have been performed. Failure to do so may result in damage to equipment. ● Use care when removing or installing rear wiring harness. Snagging and pulling may cause damage to rear wiring harness. NOTE Perform step 32 for all vehicles except M275A2 32. Remove rear wiring harness (1) from left side frame (5) and four cross braces (2) and through two holes (4) and hole (3). NOTE Perform step 33 for M275A2 vehicles. 33. Remove rear wiring harness (1) from left side frame (5) and five cross braces (6) and through holes (3) and (4). b. Installation NOTE Perform step 1 for all vehicles except M275A2. 1. Route rear wiring harness (1) between front left side frame (5) and four cross braces (2) and through two holes (4) and hole (3). NOTE Perform step 2 for M275A2 vehicles. 2. Route rear wiring harness (1) between left side frame (5) and five cross braces (6) and through hole (3) and hole (4). 7-42