TM9-2320-361-34 I 7-4. REAR WIRING HARNESS REPLACEMENT THIS TASK COVERS: a. Removal b. Installation INITIAL SETUP APPLICABLE MODELS All TEST EQUIPMENT Multimeter (Appendix B, Item 3) TOOLS General mechanic’s tool kit (Appendix B, Item 1) Tool kit, electrical (Appendix B, Item 2) MATERIALS/PARTS Fifteen locknuts (Appendix F, Item 89) Six locknuts (M275A2) (Amendix F. Item 95) MATERIALS/PARTS (Contd) Two locknuts (M756A2) (Appendix F, Item 95) Twelve locknuts (M764) (Appendix F, Item 95) Two lockwashers (Appendix F, Item 138) Five lockwashers (M275A2) (Appendix F, Item 134) Five tiedown straps (Appendix C, Item 15) REFERENCES (TM) TM 9-2320-361-20 TM 9-2320-361-34P EQUIPMENT CONDITION Battery ground cable disconnected (TM 9-2320-361-20). NOTE Tag wires for installation. 1. 2. Disconnect rear wiring harness (1) from front wiring harness (2). NOTE Perform step 2 for M756A2 vehicles. Disconnect wires (3) and (6) from rear wiring harness wires (4) and (5). 7-35