TM 9-2320-361-34 7-2. 60 AMPERE ALTERNATOR REPAIR (Contd) 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. Remove O-ring (12) from intermediate housing (6). Discard O-ring (12). Using torx socket, remove six torx head screws (2), lockwashers (3), and intermediate housing (6) from stator (4) and drive end housing (1). Discard lockwashers (3). Remove snapring (11), felt retainer (10), felt seal (9), and felt retainer (8) from intermediate housing (6). Discard snapring (11), felt retainers (10) and (8), and felt seal (9). Remove seal (5) from intermediate housing (6). Discard seal (5). Press bearing (7) out of intermediate housing (6). Discard bearing (7). Remove six screws (16), bearing retainer (17), and O-ring (18). Discard O-ring (18). Remove sleeve spacer seal (19) from bearing retainer (17). Discard sleeve spacer seal (19). Remove sleeve spacer (20), O-ring (21), and washer (22) from rotor shaft (14). Discard O-ring (21) Position drive end housing (1) in press and press rotor and fan assembly (13) out of drive end housing (1). Remove stator (4) from drive end housing (1). Remove bearing (23) and seal (15) from drive end housing (1). Discard seal (15) and bearing (23). 7-8