TM 9-2320-361-34 a. Disassembly 7-2. 60 AMPERE ALTERNATOR REPAlR(Contd) NOTE Tag leads for assembly. 1. Remove access plug (7) from endhousing (4). 2. Remove six screws (1), end cover (2), and O-ring (3) from end housing (4). Discard O-ring (3). NOTE Regulator is part of end cover; do not disassemble. 3. Disconnect three leads (10) from three terminals (11) on regulator (12). 4. Remove two screw-assembled lockwashers (6) and output plate cover (5) from end housing (4). Discard screw-assembled lockwashers (6). 5. Remove sealer from three stator leads (8). CAUTION Use heat sink when resoldering leads. Failure to do so may result in damage to equipment. 6. Desolder and disconnect three stator leads (8) from three stator lead terminals (9). 7-2