TM 9-2320-361-34 5-3. FUEL INJECTOR TUBES MAINTENANCE (Contd) 6. Remove nut (11),lockwasher (12), two retiner halves (17), and washer (9) from stud(l3). 7. Remove six locknuts (27), ten retainers (8), eight cushion halves (7), six washers (9), and screws (10) from fuel injector tubes (4), (5), and (6). Discard six locknuts (27). 8. Lift three dust caps (16) for fuel injector tubes (4), (5), and (6). 9. Loosen three nuts (15) and remove fuel injector tubes (4), (5), and (6) from fuel injector pump (14). 10. Loosen three nuts (26) and remove three fuel injector tubes (4), (5), and (6) from injector nozzles (3). b. Inspection 1. Inspect injector tubes (4), (5), (6), (21), (22), and (24) for cracks, bends, or damaged flaring. Replace if cracked, bent, or damaged. 2. Inspect six dust caps ( 16) for damage. Using fabricated tool, replace dust caps (16) if damaged. 5-5