TM 9-2320-361-34 3-18. ENGINE REPLACEMENT (Contd) 41. Install swivel (7) on pump lever (1) with pin (9) and new cotter pin (2). 42. Insert throttle control cable (5) through flange on accelerator rod (6) and install with connector (4) and screw (3). Do not tighten screw (3). Position connector (4) 1/8 in. (3 mm) from flange on accelerator rod (6) and tighten screw (3). 43. Install throttle return spring (8) on swivel (7) and throttle return clip (10). 44. Insert cable control wire (16) through swivel (14). Do not tighten screw (15). 45. Install clamp (12) on fuel injector pump (13) with new lockwasher (17) and screw (11). \ 3-74