TM 9-2320-361-34 3-18. ENGINE REPLACEMENT (Contd) 27. Disconnect wire (16) from oil pressure sending unit (15). 28. Remove nut (19), washer (18), and wire (17) from starter relay stud (20). 29. Remove nut (27), lockwasher (26), wires (25) and (24), and cable (23) from solenoid stud (22). Discard lockwasher (26). 30. Remove nut (28), lockwasher (29), and ground cable (30) from ground stud (31) on starter motor (21). Discard lockwasher (29). 31. Loosen nut (34), Pull pin (35) to side of clevis (33), and disconnect clevis (33) from remote control lever (32). 3-63