TM 9-2320-361-34 3-17. INTAKE AND EXHAUST MANIFOLDS MAINTENANCE (Contd) d. Exhaust Manifold Assembly 1. Install six new flange seal rings (14) on manifold sections (13) and (15). 2. Install manifold sections (13) and (15) in manifold section (17). 3. Install two plugs (16) in exhaust manifold sections (13) and (15). e. Intake and Exhaust Manifolds Installation 1. 2. 3. 4. 5. 6. Position two gaskets (4) on thirty studs (3). NOTE Assistant will help with steps 2 and 3. Install exhaust manifold (10) on twelve studs (3) and cylinder head (1) with twelve washers (11) and new locknuts (12). Do not tighten locknuts (12). Hold exhaust manifold (10). Install intake manifold (5) on cylinder head (2) with sixteen washers (6) and nuts (7), Tighten twelve locknuts (12). Install plug (9) and drain valve (8) on intake manifold (5). Tighten two screws (18) on starter solenoid bracket (19). 3-54