TM 9-2320-361-34 3-16. AIR COMPRESSOR SUPPORT AND GASKET REPLACEMENT THIS TASK COVERS: a. Removal b. Installation INITIAL SETUP APPLICABLE MODELS REFERENCES (TM) All TM 9-2320-361-10 TOOLS TM 9-2320-361-20 TM 9-2320-361-34P General mechanic’s tool kit (Appendix B, Item 1) EQUIPMENT CONDITION MATERIALS/PARTS ● Parking brake set (TM 9-2320-361-10). Gasket (Appendix F, Item 42) ● Air compressor removed (TM 9-2320-361-20). Sealing compound, thread locking (Appendix C, Item 18) Sealing compound, gasket forming (Appendix C, Item 19) a. Removal 1. Remove seven screws (5), washers (4), support (3), and gasket (2) from engine block (1). Discard gasket (2). 2. Remove all excess gasket (2) material from engine block (1) and support (3). 3. Remove sealer from threads of seven screws (5). b. Installation 1. Apply a thin coat of sealing compound on threads of seven screws (5). 2. Apply a thin, even coat of sealing compound on both sides of gasket (2). 3. Install new gasket (2) and support (3) on engine block (1) with seven washers (4) and screws (5). 3-50