TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 974 of 1144
TM 9-2320-361-24-2 0455 00 0455 00-16 DIFFERENTIAL CARRIER REPAIR (Contd) ASSEMBLY AND ADJUSTMENT (Contd) 16. Using bearing sleeve remover/replacer and screw, align hole in sleeve (1) with setscrew (7) hole in carrier (2) and install sleeve (1) in carrier (2). 17. Install setscrew (7) in carrier (2) and sleeve (1). NOTE Install bearing with beveled side toward gear. 18. Press bearing (4) on bevel gear (3). 19. Install spacer (8) on bevel gear (3) until seated against bearing (4). CAUTION Use brass drift to install bevel gear. Failure to do so may result in damage to gear. 20. Install bevel gear (3) in carrier (2) so bevel gear (3) rests in sleeve (1). 21. Install new woodruff key (6) on helical pinion shaft (5). CAUTION Use soft metal spacers to securely support bevel gear on sleeve during installation. The bevel gear must not be able to move within the housing. Failure to do so may result in damage to bevel gear and/or housing. NOTE Ensure alignment of key in helical pinion shaft with keyway in bevel gear. 22. Press pinion shaft (5) through carrier (2) into bevel gear (3).