TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 92 of 1144
TM 9-2320-361-24-2 0209 00 0209 00-2 CAB DOOR AND HINGES REPLACEMENT (Contd) WARNING Cab door is heavy. An assistant is required during removal and installation to prevent injury to personnel. CAB DOOR REMOVAL NOTE Assistant will help with steps 1 and 2. 1. Remove two locknuts (6), washers (7), and hinge screws (1) from three mirror braces (2) and two cab door hinges (4). Discard locknuts (6). 2. Remove cab door (5) from hinges (9) mounted on cab (8) A-pillar (10). CAB DOOR HINGES REMOVAL Remove sixteen screws (3) and cab door hinges (4) and (9) from cab door (5) and cab (8) A-pillar (10). CAB DOOR HINGES INSTALLATION Install two cab door hinges (4) on cab door (5) and two hinges (9) on cab (8) A-pillar (10) with sixteen screws (3). CAB DOOR INSTALLATION NOTE Assistant will help with steps 1 and 2. 1. Lift cab door (5) and position cab door hinges (4) to hinges (9) mounted on cab (8) A-pillar (10) and align three mirror braces (2) to hinges (4) and (9). 2. Install two hinge screws (1) through three mirror braces (2) and hinges (4) and (9). 3. Install two washers (7) and two new locknuts (6) on hinge screws (1). Tighten locknuts (6). 4. Install cab door weatherseal (WP 0217 00). 5. Install cab door check rod (WP 0215 00). 6. Install cab door window regulator (WP 0213 00). 7. Install cab door dovetail wedge (WP 0208 00). 8. Install cab door lock (WP 0214 00). 9. Install side panel (WP 0218 00). 10. Connect battery ground cable (WP 0126 00). 11. Release parking brake and remove wheel chocks (TM 9-2320-361-10).