TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 75 of 1144
TM 9-2320-361-24-2 0205 00 0205 00-1/2 blank FIELD MAINTENANCE INSTRUCTIONS 2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL) FRONT WINCH EXTENSION REPLACEMENT REMOVAL AND INSTALLATION INITIAL SETUP: Applicable Models All Materials/Parts Ten locknuts (item 147, WP 0470 00) Equipment Condition Parking brake set and wheels chocked (TM 9-2320-361-10). Battery ground cable disconnected (WP 0126 00). Front winch removed (WP 0345 00). Brush guard removed (WP 0203 00). REMOVAL 1. Remove four locknuts (4) and screws (3) from bottom of frame rail (2). Discard locknuts (4). 2. Remove six locknuts (5), screws (7), loop tiedown (1), and front winch extension (6) from frame rail (2). Discard locknuts (5). INSTALLATION 1. Install front winch extension (6), and loop tiedown (1) on frame rail (2) with six screws (7) and new locknuts (5). Do not tighten nuts (5). 2. Install four screws (3) and new locknuts (4) through bottom of frame rail (2) and front winch extension (6). Tighten nuts (4). 3. Install brush guard (WP 0203 00). 4. Install front winch (WP 0345 00). 5. Connect battery ground cable (WP 0126 00). 6. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE 2 1 7 3 4 5 6