TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 728 of 1144
TM 9-2320-361-24-2 0397 00 0397 00-2 FLOATING SEATBELT KIT REPLACEMENT (Contd) REMOVAL OF DRIVER’S SEATBELTS 1. Position driver’s seat (1) to full forward position. 2. Remove two screws (2), three washers (3), seatbelts (8), and wire ropes (6) and (7) from driver’s seat (1). 3. Remove locknut (11), screw (4), two washers (5), and wire rope (6) from back cab panel channel (26). Discard locknut (11). 4. Remove locknut (28), screw (9), two washers (10), spacer (29), and wire rope (7) from back cab panel channel (26). Discard locknut (28). NOTE Assistant will help with step 5. 5. Remove four locknuts (27), screws (12), and eight washers (13) from back cab panel channel (26). Discard locknuts (27). INSTALLATION OF DRIVER’S SEATBELTS NOTE Assistant will help with step 1. 1. Install eight washers (13), four screws (12), and new locknuts (27) on back cab panel channel (26). 2. Install wire rope (6) on back cab panel channel (26) with two washers (5), screw (4), and new locknut (11). 3. Install wire rope (7) and spacer (29) on back cab panel channel (26) with two washers (10), screw (9), and new locknut (28). 4. Install two seatbelts (8) and wire ropes (6) and (7) on driver’s seat (1) with three washers (3) and screws (2). REMOVAL OF COMPANION SEATBELTS 1. Remove locknut (18), screw (14), washer (15), seatbelt (19), and spacer (24) from back cab panel channel (26). Discard locknut (18). 2. Remove locknut (23), screw (21), washer (22), and seatbelt (20) from back cab panel channel (26). Discard locknut (23). NOTE Assistant will help with step 3. 3. Remove four locknuts (25), screws (16), and eight washers (17) from back cab panel channel (26). Discard locknuts (25).