TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 718 of 1144
TM 9-2320-361-24-2 0394 00 0394 00-2 BUMPER STEP KIT REPLACEMENT (Contd) REMOVAL 1. Remove safety pin (8) from pin (10). 2. Remove pin (10) from bumper step (9) and bracket (3). 3. Remove S-hook (11) from bumper step (9). 4. Remove two locknuts (5), lockwashers (6), washers (7), screws (12), and bumper step (9) from bracket (3). Discard lockwashers (6) and locknuts (5). 5. Remove two locknuts (2), screws (4), and bracket (3) from bumper (1). Discard locknuts (2). INSTALLATION 1. Install bracket (3) on bumper (1) with two screws (4) and new locknuts (2). 2. Install bumper step (9) on bracket (3) with two screws (12), washers (7), new lockwashers (6), and new locknuts (5). 3. Install S-hook (11) on bumper step (9). 4. Install pin (10) on bumper step (9) and bracket (3). 5. Install safety pin (8) in pin (10). NOTE Ensure step is in stowed position before truck is mobilized. 6. Connect battery ground cable (WP 0126 00). 7. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE 12 8 6 7 5 4 9 10 2 1 3 11