TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 698 of 1144
TM 9-2320-361-24-2 0389 00 0389 00-4 MACHINE GUN MOUNT KIT REPLACEMENT (Contd) DISASSEMBLY NOTE Steps 1, 2, and 3 are identical for removing ammunition trays from both front bracket post and left rear bracket post. This procedure is for the front bracket post. 1. Remove two straps (6) from ammunition tray (7). 2. Remove four locknuts (1), washers (2), screws (4), and ammunition tray (7) from front bracket post (11). Discard locknuts (1). 3. Remove four locknuts (9), washers (8), screws (10), and two tray brackets (3) from ammunition tray extensions (5). Discard locknuts (9). 4. Remove four locknuts (17), screws (14), eight washers (15), and left rear adapter (16) from left rear bracket post (18). Discard locknuts (17). 5. Remove two cotter pins (13) and straight pins (12) from right rear bracket post (19) and front bracket post (11). Discard cotter pins (13). ASSEMBLY 1. Install left rear adapter (16) on first four holes in left rear bracket post (18) with four screws (14), eight washers (15), and four new locknuts (17). Finger tighten screws (14). 2. Install two straight pins (12) on front bracket post (11) and right rear bracket post (19) with two new cotter pins (13). NOTE Steps 3, 4, and 5 are identical for assembling ammunition trays on both front bracket post and left rear bracket post. This procedure is for the front bracket post. 3. Install two tray brackets (3) on ammunition tray extensions (5) with four screws (10), washers (8), and new locknuts (9). 4. Install ammunition tray (7) on front bracket post (11) with four screws (4), washers (2), and new locknuts (1). 5. Install two straps (6) on ammunition tray (7).