TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 690 of 1144
TM 9-2320-361-24-2 0388 00 0388 00-2 A-FRAME KIT MAINTENANCE (Contd) WARNING Vehicle will become charged with electricity if A-frame contacts or breaks high voltage line. Do not attempt to leave vehicle while high voltage line is in contact with A-frame or vehicle. Leaving the vehicle may result in death or injury to personnel. REMOVAL 1. Remove adjusting screw (10) from bottom of each A-frame leg (9) and shackle bracket (11). NOTE Assistant will help with steps 2 through 4. 2. Push A-frame (12) towards cab (13). 3. Remove cable (4) from pintle hook (5) and lower A-frame (12) to ground. 4. Open snatch block (2) and remove winch cable (3). 5. Remove snatch block (2) from A-frame spreader tube (1). 6. Remove shackle pin (8), cable (4), and harness (7) from shackle (6). 7. Remove nut (17), lockwasher (16), two washers (15), eyebolt plate (19), and eyebolt (14) from rear cargo bed (18). Discard lockwasher (16). 8. Remove two nuts (27), nuts (20), washers (21), harness (7), two spacers (22), spreader tube (1), and two studs (23) from leg extensions (24). 9. Remove two pins (26) and leg extensions (24) from A-frame legs (9). 10. Remove two pins (25) and A-frame legs (9) from shackle brackets (11).