TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 688 of 1144
TM 9-2320-361-24-2 0387 00 0387 00-2 DEEP WATER FORDING KIT REGULATOR VALVE REPLACEMENT(Contd) REMOVAL WARNING Do not disconnect air lines before draining air reservoirs. Small parts under pressure may shoot out with high velocity, causing injury to personnel. 1. Remove hose (5) from elbow (4) on engine compartment firewall (1). 2. Remove tube (8) from regulator valve (7). 3. Remove regulator valve (7) from coupling (6). 4. Remove elbow (4), nut (3), lockwasher (2), coupling (6) from firewall (1). Discard lockwasher (2). INSTALLATION NOTE Wrap male pipe threads with antiseize tape prior to installation. 1. Install coupling (6) and elbow (4) on firewall (1) with new lockwasher (2) and nut (3). 2. Install regulator valve (7) on coupling (6). 3. Install tube (8) on regulator valve (7). 4. Install hose (5) on elbow (4). 5. Start engine (TM 9-2320-361-10) and allow air pressure to build up to normal operating range; check for air leaks. 6. Connect battery ground cable (WP 0126 00). 7. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE 4 5 3 2 1 6 7 8