TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 686 of 1144
TM 9-2320-361-24-2 0386 00 0386 00-2 DEEP WATER FORDING KIT CONTROL VALVE REPLACEMENT(Contd) DEEP WATER FORDING KIT CONTROL VALVE REPLACEMENT(Contd) WARNING Do not disconnect air lines before draining air reservoirs. Small parts under pressure may shoot out with high velocity, causing injury to personnel. REMOVAL 1. Remove tubes (1) and (3) from elbows (2). 2. Remove two locknuts (8), screws (10), and bracket (5) from instrument panel (9). Discard locknuts (8). 3. Remove two screws (7), plate (6), and bracket (5) from valve (4). 4. Remove two elbows (2) from valve (4). INSTALLATION NOTE Wrap male pipe threads with antiseize tape prior to installation. 1. Install two elbows (2) on valve (4). 2. Install bracket (5) and plate (6) on valve (4) with two screws (7). 3. Install bracket (5) on instrument panel (9) with two screws (10) and new locknuts (8). 4. Install tubes (1) and (3) on elbows (2). 5. Start engine (TM 9-2320-361-10) and allow air pressure to build up to normal operating range; check for air leaks at valve. 6. Connect battery ground cable (WP 0126 00). 7. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE 1 3 2 2 4 5 6 7 8 9 10