TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 682 of 1144
TM 9-2320-361-24-2 0385 00 0385 00-2 DEEP WATER FORDING KIT AIR INTAKE TUBES REPLACEMENT (Contd) REMOVAL 1. Loosen clamp (18) and remove air tube (19) from air cleaner body (2). 2. Loosen three clamps (14) and remove hose (15), elbow (16), and hose (17) from crankcase breather tube (13). 3. Loosen clamp (9) and remove hood (7) and sleeve (8) from air tube (19). 4. Remove four locknuts (12), screws (20), two retaining clamps (11), air tube (19), and hose (17) from supports (10). Discard locknuts (12). 5. Remove four nuts (22), two supports (10), U-bolt (23), and clamp half (24) from exhaust pipe (21). 6. Remove tiedown strap (4), loosen two clamps (3), and remove hose (6) from air compressor (1), steering column (5), and air cleaner body (2). Discard tiedown strap (4). INSTALLATION 1. Install hose (6) on air cleaner body (2) and air compressor (1). Tighten two clamps (3). 2. Install hose (6) on steering column (5) with new tiedown strap (4). 3. Install two supports (10) on exhaust pipe (21) with U-bolt (23), clamp half (24), and four nuts (22). 4. Install hose (17), air tube (19), and two retaining clamps (11) on supports (10) with four screws (20) and new locknuts (12). 5. Install hose (17), elbow (16), and hose (15) on crankcase breather tube (13). Tighten three clamps (14). 6. Install air tube (19) through right side panel and on air cleaner (1) with clamp (18). 7. Install sleeve (8) and hood (7) on air tube (19). Tighten clamp (9). 8. Connect battery ground cable (WP 0126 00). 9. Lower and secure hood (TM 9-2320-361-10). 10. Release parking brake and remove wheel chocks (TM 9-2320-361-10).