TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 679 of 1144
TM 9-2320-361-24-2 0384 00 0384 00-5/6 blank SECONDARY HEATER AND DUCT REPLACEMENT (Contd) HEATER, EXHAUST TUBE, AND GUARD INSTALLATION 1. Install bracket (13) on van wall (37) with clamp (16), three washers (38), four new lockwashers (17), and screws (18). 2. Install support (26) on bracket (13) with two washers (38), new lockwashers (17), screws (18), washers (38), new lockwashers (17), and screws (39). 3. Install new gasket (27) and exhaust tube (28) on support (26) with four screws (28). 4. Install new gasket (36) and tube adapter (35) on van wall (37) with three lockwashers (32) and screws (33). 5. Install exhaust tube (29) on tube adapter (35) with clamp (34). 6. Install guard (30) on exhaust tube (29), support (26), and tube adapter (35) with washer (31), new lockwasher (32), and two screws (28) and (33). 7. Install new O-ring (24), washer (23), and heater (15) on support (26) with two clamps (14). 8. Install adapter (20) on heater (15) with eight screws (21). 9. Install duct (25) on adapter (20) with clamp (22). 10. Install heater harness (19) on heater (15). 11. Connect battery ground cable (WP 0126 00). 12. Release parking brake and remove wheel chocks (TM 9-2320-361-10). ~ END OF WORK PACKAGE 19 20 21 22 25 23 24 18 17 16 15 14 26 27 28 28 30 32 33 31 29 39 38 17 33 32 18 17 38 36 35 17 38 18 14 13 37 34