TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 657 of 1144
TM 9-2320-361-24-2 0378 00 0378 00-1/2 blank FIELD MAINTENANCE INSTRUCTIONS FOR SPECIAL PURPOSE KITS 2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL) PRIMARY AND SECONDARY HEATER EXHAUST TUBE REPLACEMENT REMOVAL AND INSTALLATION INITIAL SETUP: Applicable Models M109A3, M185A3 Materials/Parts O-ring (item 122, WP 0470 00) Equipment Condition Parking brake set and wheels chocked (TM 9-2320-361-10). Battery ground cable disconnected (WP 0126 00). REMOVAL WARNING Do not touch hot exhaust system components with bare hands. Severe injury to personnel will result. 1. Remove two screws (4) and washers (2) from clamp (3) and van body (7). 2. Remove nut (1), washer (2), screw (9), and clamp (3) from outside exhaust tube (5). 3. Remove four screws (8), O-ring (6), and outside exhaust tube (5) from van body (7). Discard O-ring (6). INSTALLATION 1. Install new O-ring (6) and outside exhaust tube (5) on van body (7) with four screws (8). 2. Install clamp (3) on outside exhaust tube (5) with screw (9), washer (2), and nut (1). 3. Install clamp (3) on van body (7) with two screws (4) and washers (2). 4. Connect battery ground cable (WP 0126 00). 5. Release parking brake and remove wheel chocks (TM 9-2320-361-10). 1 2 2 3 4 5 6 9 7 8 ~ END OF WORK PACKAGE