TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 645 of 1144
TM 9-2320-361-24-2 0375 00 0375 00-1/2 blank FIELD MAINTENANCE INSTRUCTIONS FOR SPECIAL PURPOSE KITS 2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL) PRIMARY HEATER FUEL FILTER REPLACEMENT REMOVAL AND INSTALLATION INITIAL SETUP: Applicable Models M109A3, M185A3 Materials/Parts Antiseize tape (item 42, WP 0468 00) Equipment Condition Parking brake set and wheels chocked (TM 9-2320-361-10). Battery ground cable disconnected (WP 0126 00). REMOVAL WARNING Diesel fuel is flammable. Do not perform fuel system procedures near open flames. Injury or death to personnel may result. 1. Remove fuel line (8) from elbow (7) and fuel tube (2) from elbow (3). 2. Remove elbows (3) and (7) from filter (6). 3. Remove two screws (5), washers (4), and filter (6) from van body (1). INSTALLATION NOTE Wrap male pipe threads with antiseize tape prior to installation. 1. Install filter (6) on van body (1) with two washers (4) and screws (5). 2. Install elbows (3) and (7) on filter (6). 3. Install fuel tube (2) on elbow (3) and fuel line (8) on elbow (7). 4. Connect battery ground cable (WP 0126 00). 5. Release parking brake and remove wheel chocks (TM 9-2320-361-10). 1 8 2 3 4 5 6 7 ~ END OF WORK PACKAGE