TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 616 of 1144
TM 9-2320-361-24-2 0364 00 0364 00-2 ALCOHOL EVAPORATOR MAINTENANCE (Contd) WARNING Diesel fuel is flammable. Do not perform fuel system procedures near open flames. Injury or death to personnel may result. REMOVAL 1. Remove jar (9) and O-ring (8) from evaporator body (7). 2. Disconnect tube (5) from compressor elbow (13) and adapter (6). 3. Remove three locknuts (11), screws (12), and evaporator body (7) from bracket (1). Discard locknuts (11). 4. Disconnect adapter (6) from evaporator body (7). 5. Disconnect tube (3) from outlet manifold (2). 6. Remove two screws (4), outlet manifold (2), and bracket (1) from compressor (10). INSPECTION Inspect O-ring (8) for rips, tears, or other damage. Replace O-ring (8) if ripped, torn, or damaged. INSTALLATION 1. Install bracket (1) and outlet manifold (2) on compressor (10) with two screws (4). 2. Connect tube (3) to outlet manifold (2). NOTE Apply sealing compound to adapter prior to installation. 3. Install adapter (6) on evaporator body (7). 4. Install evaporator body (7) on bracket (1) with three screws (12) and new locknuts (11). 5. Connect tube (5) to compressor elbow (13) and adapter (6). 6. Install O-ring (8) and jar (9) on evaporator body (7). 7. Fill evaporator jar, start engine (TM 9-2320-361-10), and check alcohol evaporator operation. 8. Connect battery ground cable (WP 0126 00). 9. Lower and secure hood (TM 9-2320-361-10). 10. Release parking brake and remove wheel chocks (TM 9-2320-361-10).