TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 600 of 1144
TM 9-2320-361-24-2 0359 00 0359 00-2 THERMAL BARRIER INSULATION REPLACEMENT (Contd) REMOVAL NOTE All thermal barrier insulation is removed the same way. This procedure covers replacement of left rear insulation panel only. Other panels are shown for reference only. 1. Remove panel (2) from cab interior (1). Discard panel (2) if irreparable damage occurs when removing. 2. Remove all remaining insulating material and adhesive from contact surface areas. INSTALLATION CAUTION Once panel is coated with methylethylketone and put in place, it cannot be moved. Be careful not to place panel in the wrong position. NOTE • Make all necessary cutouts and slits in panels before installation. • Shiny side of panel must face outward. 1. Place panel (2) on cab (1) to check for fit. 2. Remove panel (2) and coat contact areas with methylethylketone. 3. Install panel (2) on cab (1) and press firmly into place. NOTE If additional adhesive sealant is required, perform steps 4 and 5. 4. Remove panel (2) and coat contact areas with adhesive sealant. 5. Install panel (2) on cab (1) and press firmly into place. 6. Install driver’s seat (WP 0236 00). 7. Install companion seat (WP 0234 00). 8. Connect battery ground cable (WP 0126 00). 9. Release parking brake and remove wheel chocks (TM 9-2320-361-10).