TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 590 of 1144
TM 9-2320-361-24-2 0356 00 0356 00-2 OIL PAN SHROUD AND EXHAUST TUBE REPLACEMENT (Contd) WARNING Do not touch hot exhaust system components with bare hands. Severe injury to personnel will result. REMOVAL 1. Remove cotter pin (9) and exhaust tube (10) from oil pan shroud (6). Discard cotter pin (9). 2. Remove two cotter pins (12), elbow (13), and exhaust tube (10) from heater (14). Discard cotter pins (12). 3. Remove locknut (1), screw (3), clamp (2), and exhaust tube (10) from splash shield (4). Discard locknut (1). 4. Remove exhaust tube (10) from vehicle. 5. Remove four screws (8), lockwashers (7), and oil pan shroud (6) from engine oil pan (5). Discard lockwashers (7). INSTALLATION 1. Install oil pan shroud (6) on engine oil pan (5) with four new lockwashers (7) and screws (8). 2. Install exhaust tube (10) on oil pan shroud (6) with new cotter pin (9). 3. Insert exhaust tube (10) through hole (11) in toolbox. 4. Install elbow (13) and exhaust tube (10) on heater (14) with two new cotter pins (12). 5. Install exhaust tube (10) on splash shield (4) with clamp (2), screw (3), and new locknut (1). 6. Connect battery ground cable (WP 0126 00). 7. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE 10 12 12 13 14 11 1 2 3 4 5 6 7 8 9