TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 59 of 1144
TM 9-2320-361-24-2 0200 00 0200 00-1/2 blank FIELD MAINTENANCE INSTRUCTIONS 2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL) REAR SHACKLE REPLACEMENT REMOVAL AND INSTALLATION INITIAL SETUP: Applicable Models All Materials/Parts Three locknuts (item 422, WP 0470 00) Cotter pin (item 20, WP 0470 00) Equipment Condition Battery ground cable disconnected (WP 0126 00). Parking brake set and wheels chocked (TM 9-2320-361-10). Rear bumperettes removed (WP 0201 00). REMOVAL 1. Remove cotter pin (3) from pin (5). Discard cotter pin (3). 2. Remove pin (5) and shackle (4) from bracket (2). 3. Remove three locknuts (7), screws (6), and bracket (2) from crossmember (1). Discard locknuts (7). INSTALLATION 1. Install bracket (2) on crossmember (1) with three screws (6) and new locknuts (7). 2. Install shackle (4) on bracket (2) with pin (5). 3. Install new cotter pin (3) in pin (5). 4. Install rear bumperettes (WP 0201 00). 5. Connect battery ground cable (WP 0126 00). 6. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE 1 2 3 4 5 6 7