TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 579 of 1144
TM 9-2320-361-24-2 0352 00 0352 00-1/2 blank FIELD MAINTENANCE INSTRUCTIONS FOR SPECIAL PURPOSE KITS 2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL) PERSONNEL HEATER CONTROL BOX REPLACEMENT REMOVAL AND INSTALLATION INITIAL SETUP: Applicable Models All Tools and Special Tools General mechanic’s tool kit (item 116, WP 0469 00) Materials/Parts Two lockwashers (item 242, WP 0470 00) Equipment Condition Parking brake set and wheels chocked (TM 9-2320-361-10). Battery ground cable disconnected (WP 0126 00). NOTE This procedure is the same for the engine coolant heater control box. REMOVAL 1. Disconnect wiring harness (4) from control box (7). 2. Disconnect wire (6) from wire (5). 3. Remove two nuts (2), lockwashers (1), and control box (7) from bracket (3). Discard lockwashers (1). INSTALLATION 1. Install control box (7) on bracket (3) with two new lockwashers (1) and nuts (2). 2. Connect wire (6) to wire (5). 3. Connect wiring harness (4) to control box (7). 4. Connect battery ground cable (WP 0126 00). 5. Release parking brake and remove wheel chocks (TM 9-2320-361-10). 4 5 6 7 1 3 2 END OF WORK PACKAGE