TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 537 of 1144
TM 9-2320-361-24-2 0343 00 0343 00-1/2 blank FIELD MAINTENANCE INSTRUCTIONS 2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL) FRONT WINCH CABLE REPLACEMENT REMOVAL AND INSTALLATION INITIAL SETUP: Applicable Models All Tools and Special Tools General mechanic’s tool kit (item 116, WP 0469 00) References WP 0020 00 Equipment Condition Parking brake set and wheels chocked (TM 9-2320-361-10). Front winch cable unwound (TM 9-2320-361-10). WARNING Wear leather gloves when handling cable. Do not let cable run through hands. Broken or rusty wires may cause injury to personnel. REMOVAL 1. Loosen setscrew (2) and remove front winch cable (3) from drum (1). 2. Remove nut (4) and screw (6) from clevis (7) and remove chain (5). INSTALLATION 1. Install chain (5) on clevis (7) with screw (6) and nut (4). 2. Install front winch cable (3) in drum (1) and tighten setscrew (2). 3. Wind front winch cable on front winch drum (TM 9-2320-361-10). 4. Lubricate winch cable (WP 0020 00). 5. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE 1 3 2 4 5 6 7