TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 53 of 1144
TM 9-2320-361-24-2 0198 00 0198 00-1/2 blank FIELD MAINTENANCE INSTRUCTIONS 2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL) FRONT SHACKLE (W/WINCH) REPLACEMENT REMOVAL AND INSTALLATION INITIAL SETUP: Applicable Models All Materials/Parts Two locknuts (item 136, WP 0470 00) Two locknuts (item 147, WP 0470 00) Equipment Condition Parking brake set and wheels chocked (TM 9-2320-361-10). Battery ground cable disconnected (WP 0126 00). NOTE Left shackle has two spacers and right shackle has only one. This procedure covers the left shackle and bracket. REMOVAL 1. Remove retaining pin (6) from pin (5). 2. Remove pin (5), and shackle (4) from bracket (3). 3. Remove three locknuts (7), screws (2), and two spacers (9) from bracket (3) and bumper (8). Discard locknuts (7). 4. Remove locknut (10), screw (1), and bracket (3) from bumper (8). Discard locknut (10). INSTALLATION 1. Install bracket (3) on bumper (8) with screw (1) and new locknut (10). 2. Install two spacers (9), three screws (2), and new locknuts (7) on bracket (3) and bumper (8). 3. Install shackle (4) on bracket (3) with pin (5). 4. Install retaining pin (6) on pin (5). Latch retaining pin (6). 5. Connect battery ground cable (WP 0126 00). 6. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE 2 1 3 4 5 7 6 8 9 10