TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 525 of 1144
Applicable Models M185A3, M109A3 Equipment Condition Parking brake set and wheels chocked (TM 9-2320-361-10). Battery ground cable disconnected (WP 0126 00). Exhaust blower motor and bracket removed (WP 0301 00). TM 9-2320-361-24-2 0337 00 0337 00-1/2 blank FIELD MAINTENANCE INSTRUCTIONS 2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL) EXHAUST BLOWER DUCT ASSEMBLY REPLACEMENT REMOVAL AND INSTALLATION INITIAL SETUP: END OF WORK PACKAGE 5 2 1 7 4 6 3 4 ~ REMOVAL 1. Remove four screws (1) and adapter (3) from duct assembly (2). 2. Remove eight screws (5) and four angles (4) from van wall (7). 3. Remove four screws (6) and duct assembly (2) from van wall (7). INSTALLATION 1. Install duct assembly (2) on van wall (7) with four screws (6). 2. Install four angles (4) on van wall (7) with eight screws (5). 3. Install adapter (3) on duct assembly (2) with four screws (1). 4. Install exhaust blower motor and bracket (WP 0301 00). 5. Connect battery ground cable (WP 0126 00). 6. Release parking brake and remove wheel chocks (TM 9-2320-361-10).