TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 506 of 1144
TM 9-2320-361-24-2 0330 00 0330 00-2 VAN BODY TOOL REPLACEMENT (M185A3) (Contd) COMPRESSOR REMOVAL 1. Remove wingnut (14), washer (15), and lockwasher (16) from compressor mounting base (12), Discard lockwasher (16). 2. Remove wingnut (2), two lockwashers (1), screw (4), ground strap (3), and lockwasher (1) from compressor mounting base (12) and angle (5). Discard lockwashers (1). 3. Remove top cabinet drawer (38) and two screws (7) from cabinet (6). 4. Remove compressor (13), two nuts (11), washers (10), lockwashers (9), and block (8) from cabinet (6). Discard lockwashers (9). VICE AND MACHINE SWIVEL BASE REMOVAL Remove four nuts (39), lockwashers (40), screws (35), washers (37), and vice and machine swivel case (34) from table (20). Discard lockwashers (40). FIRE EXTINGUISHER BRACKET REMOVAL 1. Remove fire extinguisher (36) from fire extinguisher mounting bracket (31). 2. Remove four nuts (29), washers (30), screws (17), lockwashers (18), and fire extinguisher mounting bracket (31) from van body wall (19). Discard lockwashers (18). GRINDING MACHINE REMOVAL Remove four wingnuts (27), lockwashers (28), screws (33), washers (32), and grinding machine (26) from table (20). Discard lockwashers (28). DRILL AND STAND REMOVAL Remove four nuts (25), washers (24), screws (22), lockwashers (23), and drill and stand (21) from table (20). Discard lockwashers (23). DRILL AND STAND INSTALLATION Install drill and stand (21) on table (20) with four new lockwashers (23), screws (22), washers (24), and nuts (25). GRINDING MACHINE INSTALLATION Install grinding machine (26) on table (20) with four screws (33), washers (32), new lockwashers (28), and wingnuts (27). FIRE EXTINGUISHER BRACKET INSTALLATION NOTE Assistant will help with step 1. 1. Install fire extinguisher mounting bracket (31) on van body wall (19) with four new lockwashers (18), screws (17), washers (30), and nuts (29). 2. Install fire extinguisher (36) on mounting bracket (31). VICE AND MACHINE SWIVEL BASE INSTALLATION Install vice and machine swivel base (34) on table (20) with four washers (37), screws (35), new lockwashers (40), and nuts (39).