TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 498 of 1144
TM 9-2320-361-24-2 0326 00 0326 00-2 CONVERTER SELECTOR SWITCH REPLACEMENT (Contd) REMOVAL 1. Remove fourteen screws (11) from converter front panel (3) and converter (6). 2. Turn screw (9) and open door (10). Pull converter front panel (3) away from converter (6). 3. Remove two screws (1), selector switch (4), and identification plate (2) from converter front panel (3). NOTE Prior to removal, tag lead wires for installation. 4. Remove five screws (8), lockwashers (5), and six wires (7) from selector switch (4). Discard lockwashers (5). INSTALLATION 1. Install six wires (7) on selector switch (4) with five new lockwashers (5) and screws (8). 2. Install identification plate (2) and selector switch (4) on converter front panel (3) with two screws (1). 3. Install converter front panel (3) on converter (6) with fourteen screws (11). 4. Close door (10) and turn screw (9). 5. Install converter (WP 0328 00). 6. Connect battery ground cable (WP 0126 00). 7. Release parking brake and remove wheel chocks (TM 9-2320-361-10). END OF WORK PACKAGE 6 3 2 1 5 4 7 5 7 10 8 5 8 11 7 8 9