TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 490 of 1144
TM 9-2320-361-24-2 0323 00 0323 00-2 VAN BODY ACCESS PLATE, ACCESS COVER, AND RETAINER ASSEMBLY (Contd) ACCESS PLATE REMOVAL Remove four screw-assembled lockwashers (2) and access plate (3) from van wall (4). Discard screw- assembled lockwashers (2). ACCESS PLATE INSTALLATION Install access plate (3) on van wall (4) with four new screw-assembled lockwashers (2). ACCESS COVER REMOVAL Remove six screw-assembled lockwashers (1) and access cover (10) from van wall (4). Discard screw- assembled lockwashers (1). ACCESS COVER INSTALLATION Install access cover (10) on van wall (4) with six new screw-assembled lockwashers (l). RETAINER ASSEMBLY REMOVAL 1. Remove ten screw-assembled lockwashers (7) and two retainers (6) from van wall (4). Discard screw-assembled lockwashers (7). 2. Remove four screw-assembled lockwashers (7) and retainer (9) from van wall (4). Discard screw- assembled lockwashers (7). 3. Remove four screw-assembled lockwashers (7), retainer with door catch (8), and weather seal (5) from van wall (4). Discard screw-assembled lockwashers (7). RETAINER ASSEMBLY INSTALLATION 1. Install weather seal (5) and retainer with door catch (8) on van wall (4) with four new screw- assembled lockwashers (7). 2. Install retainer (9) on van wall (4) with four new screw-assembled lockwashers (7). 3. Install two retainers (6) on van wall (4) with ten new screw-assembled lockwashers (7). 4. Connect battery ground cable (WP 0126 00). 5. Release parking brake and remove wheel chocks (TM 9-2320-361-10).