TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 448 of 1144
TM 9-2320-361-24-2 0315 00 0315 00-12 115- AND 24-VOLT WIRING HARNESS REPLACEMENT (Contd) INSTALLATION CAUTION Use care when installing wiring harnesses. Excessive snagging or pulling may damage wires. NOTE Safety wire must be secured to wiring harnesses with electrical tape. 1. Position main wiring harness (2) in roof (3). 2. Secure main wiring harness (2) by closing tabs (1). 3. Install three grommets (9) and two grommets (13) in van wall (4). 4. Attach safety wires (7) to five wire leads (5), (6), (8), (11), and (12). NOTE Do not remove safety wire from wire leads until wires are connected. 5. Pull safety wires (7) so that wire leads (5), (6), (8), (11), and (12) are pulled through van wall (4). ~ 3 2 1