TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 402 of 1144
TM 9-2320-361-24-2 0304 00 0304 00-2 VAN DOOR SEALS REPLACEMENT (Contd) NOTE Secure van doors in open position. REMOVAL 1. Remove four seals (2) from bottom, top, and side channels (3). Discard seals (2). 2. Remove seal (5) from channel (4) on left van door (1). Discard seals (5). CLEANING WARNING Skysol 100 solvent is combustible; DO NOT use or store near heat, sparks, flame, or other ignition sources. Use mechanical ventilation whenever product is used in a confined space, heated above ambient temperatures, or agitated. Keep container sealed when not in use. Contact with Skysol 100 may cause skin irritation. Use chemical-resistant gloves. In case of skin contact, remove any contaminated clothing and wash skin thoroughly with soap and water.Wash contaminated clothing before reuse. Eye contact may cause irritation, tearing, or blurring of vision. Use face shield or goggles when eye contact may occur. In case of eye contact, flush eyes with large amounts of water for at least 15 minutes or until irritation subsides. Inhalation may cause irritation to upper respiratory passages. DO NOT have food or drink in the vicinity. Failure to comply may result in injury to personnel. Clean adhesive remains from all four sides of channel (3) and channel (4) on left van door with Skysol 100 solvent. INSTALLATION 1. Apply adhesive to top, bottom, and side channels (5) and (4) on left van door (1). 2. Install four new seals (2) on top, bottom, and side channels (3). 3. Install new seal (5) on channel (4) on left van door (1). 4. Install ladder (WP 0325 00). 5. Close van door (TM 9-2320-361-10). 6. Connect battery ground cable (WP 0126 00). 7. Release parking brake and remove wheel chocks (TM 9-2320-361-10). 2 3 3 2 3 2 4 5 1 ~ END OF WORK PACKAGE