TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 395 of 1144
TM 9-2320-361-24-2 0301 00 0301 00-1/2 blank FIELD MAINTENANCE INSTRUCTIONS 2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL) EXHAUST BLOWER MOTOR AND BRACKET REPLACEMENT REMOVAL AND INSTALLATION INITIAL SETUP: Applicable Models M185A3, M109A3 Materials/Parts Six screw-assembled lockwashers (item 275, WP 0470 00) Two screw-assembled lockwashers (item 267, WP 0470 00) Equipment Condition Parking brake set and wheels chocked (TM 9-2320-361-10). Battery ground cable disconnected (WP 0126 00). REMOVAL 1. Remove blower motor cable (4) from receptacle (9). 2. Remove two screw-assembled lockwashers (2) from bracket (3) and ceiling (1). Discard screw-assembled lockwashers (2). 3. Remove six screw-assembled lockwashers (6) and blower motor assembly (5) from adapter (8). Discard screw-assembled lockwashers (6). 4. Remove two nuts (7) and bracket (3) from blower motor (5). INSTALLATION 1. Install bracket (3) on blower motor (5) with two nuts (7). 2. Install blower motor assembly (5) on adapter (8) with six new screw-assembled lockwashers (6). 3. Install bracket (3) on ceiling (1) with two new screw-assembled lockwashers (2). 4. Insert blower motor cable (4) into receptacle (9). 5. Connect battery ground cable (WP 0126 00). 6. Release parking brake and remove wheel chocks (TM 9-2320-361-10). 3 4 5 6 8 9 1 2 7 ~ ~ END OF WORK PACKAGE