TM-9-2320-361-24-2 Field Maintenance Manual Volume 2 for M44A2 Series Trucks
Page 378 of 1144
TM 9-2320-361-24-2 0296 00 0296 00-2 TANK BODIES UPPER AND LOWER REAR SPLASH GUARD REPLACEMENT (Contd) ~ ~ 1 2 3 14 13 11 6 9 12 10 4 5 7 8 END OF WORK PACKAGE WARNING Diesel fuel is flammable. Do not perform fuel system procedures near open flames. Injury or death to personnel may result. LOWER SPLASH GUARD REMOVAL Remove three locknuts (6), screws (8), retainer strip (9), and lower splash guard (10) from upper splash guard (4). Discard locknuts (6). UPPER SPLASH GUARD REMOVAL 1. Remove two locknuts (7) and screws (12) from braces (11) and upper splash guard (4). Discard locknuts (7). 2. Remove two locknuts (13), screws (2), and braces (11) from crossmember (1). Discard locknuts (13). 3. Remove three locknuts (5), screws (3), and upper splash guard (4) from crossmember (14). Discard locknuts (5). UPPER SPLASH GUARD INSTALLATION 1. Install upper splash guard (4) on crossmember (14) with three screws (3) and new locknuts (5). 2. Install two braces (11) on crossmember (1) with two screws (2) and new locknuts (13). 3. Install two braces (11) on upper splash guard (4) with two screws (12) and new locknuts (7). LOWER SPLASH GUARD INSTALLATION 1. Install retainer strip (9) and lower splash guard (10) on upper splash guard (4) with three screws (8) and new locknuts (6). 2. Connect battery ground cable (WP 0126 00). 3. Release parking brake and remove wheel chocks (TM 9-2320-361-10).